US-based BridgeCom producing sub-$100 220 MHz HT

These days there are a lot of handy-talkies (HTs) being produced from China that are selling like crazy because in part they are so inexpensive. It caters to the amateur radio operator on a budget. I myself own 4 and purchased 8 for some kids in my daughter's school radio club for when some of the students get their license.

I find it rather ironic that 20 years ago, a lot of the "old timers" in ham radio were saying that the expense of the hobby was going to kill ham radio, how $200 HT's and $300 mobiles and $500 HF rigs were going to suck the life out of the hobby and that it was going to deter new hams from coming in.

Now, those exact same hams are complaining that these "cheap Chinese radios" are going to be the downfall of the hobby, allowing any Tom, Dick, and Harry to get on the air and cause chaos and havoc. So which is it, "expensive and a deterrent", or "cheap and all-inclusive"?

It does seem like the VHF and UHF bands are growing with new hams getting the Baofengs/Pofungs, Wouxuns, Anytones, TYTs and Jetstreams...but to me, if it keeps the bands active and encourages new hams, and especially young hams, into getting on the air, then let them have at it. To me at least, there's not a difference in quality of the signal (although programming the radios can be a bear without the cable and software). Typically, as long as you're not talking about what kind of radio you are using, then it doesn't matter what kind of radio you're on, does it? Ignorance often is bliss.

The big reason I bought the Wouxun KG-UV2D was the fact that it had 220 MHz (1.25 meter) capability. Until then, getting a 220 MHz radio was an expensive endeavor. I had not seen a 220 MHz radio selling for less than $200. And it seemed that the older the radio, the more "valuable" it was to the seller. 

BridgeCom BCH-220

I have 2 of the Wouxuns and the biggest reason was that they offered 2m/220 dual band capability and at about $105 it was too good to pass up. Unfortunately 220 MHz is still a bit quiet. 

Chances are the reason for the animosity about the "cheap radios" from some is the fact that they are made in China. While that can be a point of contention for some, the fact is that these radios are out there, people are buying them - and using them - and it's not really affected the bottom line of the heavyweights such as ICOM, Yaesu, and Kenwood, at least not as far as I can tell.

However, if you're interested in getting on 1.25 meters, and don't have a lot of cash to spare, and are really trying to keep in tune with "Made in the USA", then BridgeCom out of Missouri may just have the radio for you.

Due to be released in September, the BCH-220 is a single-band portable radio that should hopefully satisfy the ham who wants to get on 220 MHz on a budget, yet not have to "lower themselves" to purchasing from outside of the US. Current selling price is $80.

Although it appears to be just a monoband radio, it has 199 memories, tactile buttons to press, 2/5W power output, is durable and easy to carry, weighing 230 grams, or just over a 1/2 lb.

Below is a video from BridgeCom VP Tim King describing the radio.

This may be my next 220 radio!

Wouxun.us no longer selling (some) Wouxun radios

It seems that US/China relations are a bit rocky for Import Communications, the distributor for Wouxun radios...until now.

PD0AC reports that Ed Griffin (W4KMA) at Import Communications has been unhappy with the support that the Wouxun - pronounced "Oh-sheng" - folks have provided (or rather haven't provided) concerning an issue with the HT's apparently losing their memories at random, among other issues. As a result, he's no longer selling new inventory of Wouxun radios and will be replacing them with AnyTone products, but still under the competitor's site's name.

The (less-than-flattering) message on Wouxun.us's web site

Griffin reports that the Wouxun dual-band models lose memory without warning and that he has replaced approximately 500 radios out of pocket because Wouxun refuses to honor warranties or fix the issue, or replace the defective radios.

What you see when clicking on the KG-UV6D page on Wouxun.us

When you go to Wouxun.us you get a couple of less-than-flattering messages with a message stating that Wouxun radios will no long be sold, but accessories will. The prices that are supposedly "closeout" are about the same prices I paid when I bought my 2 KG-UV2D radios at 2 different hamfests.

While there is no clear distinction as to whether the memory issue is exclusively with the handheld radios or also with their mobile radios, I did notice that the dual-band mobile is no longer offered on the Wouxun.us site. The high price might have had a bit to do with that. Considering the relatively low price of the HT's, I thought that the dual-band mobile radio would have been under $200, but the $360+ price tag kept me away. I could buy plenty of other mobile radios for a lot less. Their quad-band mobile is also not appearing on the site, although the KG-UVA1 dual-band amateur/public service radio is still being offered, as is the KG-703E single-band VHF radio.

While I can sympathize with Griffin if indeed the radios are defective, the graphics used on the site are a bit over the top when trying to make a statement. But then again, I probably would be doing the same thing if the Chinese counterparts I relied on for service and support were treating me the same way.

PD0AC updated that a European distributor of Wouxun radios sold about 500 radios and only had 1 radio with the issue that Import Communications is reporting.

Wouxun came onto the scene a few years ago offering new radios at remarkably low prices, about $110 give or take $10. However, the last few hamfests I've attended, nary a Wouxun was in sight, replaced instead by an even lower-priced Baofeng radio series that has been offering many of the same features for about $50. The only reason I didn't buy one was because they had 2m/440, and not 2m/220.

I own 2 of the KG-UV2D radios with 2m/220 capability and the only problem I've encountered has been that one of the battery packs is now not holding a charge. Other than that I've had no issues with the radios. I don't know if this is isolated to a certain batch of radios that came of the assembly line or with an entire product line, but as this plays out I'm sure we'll find out more about this issue.